Made to Worship UV DTF

UV DTF transfers will adhere to most hard surfaces. They are waterproof and scratch-resistant. 

• Not recommended for dishwashers.
• You may need to trim as needed. 
• Please note that colours will vary compared to this image mockup due to the screen 
• No tools, heat, cutting machine, or ovens are required! 

Directions: 

1. Peel backing off the transfer
2. Place the transfer on the cup. Make sure it is straight, as you cannot lift it again to reposition it. 
3. Smooth the design from the centre out to remove any bubbles
4. Rub the decals down with your fingers or a squeegee 
5. Peel the top layer of film off the design